Mobile troubleshooting and support

If you phone isn't turning on, if may be due to a flat battery or a faulty charger or cable. Test the charger and cable by seeing if another device will successfully charge using it. If it works, plug your phone in and allow it to charge before attempting to switch it back on.

If it's still not working, you'll need to get in contact with the manufacturer.

If your battery is running out too quickly, it may be because of the number of apps you have open on your phone. A lot of apps continue to run in the background, even after you've left them. This can cause an extra strain on your battery and cause it to run out quicker than usual.

On an iPhone you can swipe up from the home screen or double tap the home button to access the open app selection screen, then swipe up on the apps you want to close.

For Android phones, you'll need to check with the manufacturer on how to do this.

Another common battery drain is the brightness of your screen. By dimming your screen brightness a little, you can make your battery will last a bit longer.

Sometimes, turning your phone off then on again can help resolve mobile connectivity issues. Here's how:

1. Turn off the phone by holding down the power button and selecting turn off or shut down
2. Open the SIM tray and carefully remove the SIM card and wipe it down using a clean, dry cloth
3. Reinsert the SIM and power the device on.

From here, wait 1-2 minutes for the network to re-engage, then try making a call.

If this doesn't resolve the issue, get in touch with us.

Normally a device will automatically configure the settings from the SIM card to connect to the internet. However, for a number of reasons, this may need to be manually set up.

If you're using an iPhone, here are the steps:

1. Go to your Settings, then Mobile > Mobile Data Options > Mobile Data Network
2. Select APN and enter yesinternet, then select Mobile Tap Settings.
3. To finish, restart your phone and wait 1-2 minutes before testing.

If you're using an Android device, the specific settings may differ depending on your device. Here are the steps:

1. Go to your settings, and find the Access Point Names (APN) settings, usually located in Mobile Data or Mobile Networks section
2. Add a new APN and enter the name AGL Phone Internet, then enter yesinternet for the APN.
3. The remainder of the settings should be as follows
       • MCC: 505
       • MNC: 02
       • Authentication type: PAP
       • APN type: default
       • Bearer: unspecified 
4. Save the settings, then select the APN connection you've just created.
5. To finish, restart your phone and wait 1-2 minutes before testing.

If you're still having issues, get in touch with us.

If you're having issues with your SIM card, first remove it, wipe it with clean, dry cloth then reinsert it. Ideally, you should do this with the phone powered off so the settings can be re-engaged when you power your phone back on.

If you're still having issues with your SIM card, we'll arrange to send you a new one - get in contact with us using the support options below.

If you’re having issues setting up or using voicemail, you may be able to find help viewing our Voicemail basics. You can find out how to:

• set up voicemail

• get your voicemail

• extend the ring time

• deactivate voicemail.